Project64 Forums

Project64 Forums (http://forum.pj64-emu.com/index.php)
-   Open Discussion (http://forum.pj64-emu.com/forumdisplay.php?f=9)
-   -   Trouble Calibrating Controller (http://forum.pj64-emu.com/showthread.php?t=2447)

arryouhappy 4th May 2011 05:37 AM

Trouble Calibrating Controller
 
I purchased a Komodo USB converter with the Psx/N64 controller ports. I was having trouble setting up the keys in my emulator so I tried to calibrate the controller. When looking at the 4 axis 16 button joystick properties page the buttons are going crazy. When I try to go through the calibration wizard it zips through it so fast I don't have time to read the steps, so I can't calibrate it. Also, I am using a Nintendo N64 controller.. not a Madcatz or off brand controller.

Does anyone have a fix to this issue?

ExtremeDude2 4th May 2011 01:15 PM

Quote:

Originally Posted by arryouhappy (Post 28731)
I purchased a Komodo USB converter with the Psx/N64 controller ports. I was having trouble setting up the keys in my emulator so I tried to calibrate the controller. When looking at the 4 axis 16 button joystick properties page the buttons are going crazy. When I try to go through the calibration wizard it zips through it so fast I don't have time to read the steps, so I can't calibrate it. Also, I am using a Nintendo N64 controller.. not a Madcatz or off brand controller.

Does anyone have a fix to this issue?

Did you install the driver? If so is there an updated driver? If so did you install it?

arryouhappy 4th May 2011 04:13 PM

I believe it uses a HID which doesn't need drivers, or so said the internet. I did try going into device manager and updating drivers but it said they were up to date.

HatCat 4th May 2011 04:56 PM

Also asking to verify what controller plugin and respective version in use.

arryouhappy 5th May 2011 05:21 PM

I'm using the N64 controller plugin and I'm not sure what version of what you're asking about. If you're talking about project 64 I haven't even gotten there yet with the controller.

HatCat 6th May 2011 01:06 AM

Um, I just meant the version of the controller plugin.

Options/Settings... in Project64, should tell you the name and version of the exact plugin for the "controller plugin" in use in the respective field.

arryouhappy 7th May 2011 05:52 AM

I've tried all of them.. but I usually keep it on N-rage V2 1.83. Whatever controller plug in I use in Project64 I get the same results. Under 'Test' in Game Controllers in my control panel, the axes are going all over the place. When I try to calibrate them, it goes through the wizard so fast I cant read what it says.

HatCat 7th May 2011 08:15 PM

Try testing the 2.2 version of N-Rage instead of 1.83.

You can get it here.
https://sourceforge.net/projects/nra...a.zip/download

Alunalun 8th May 2011 08:38 AM

Quote:

Originally Posted by arryouhappy (Post 28914)
it goes through the wizard so fast I cant read what it says.

That's very odd - sounds like among all the crazy movements it's doing, it's hitting enter a lot.
If it's sending a load of rubbish to the computer sounds like you definitely need drivers...?

Definitely sounds like a controller/driver problem though, not going to be solved by more versions of N-rage...

HatCat 8th May 2011 07:46 PM

lol, if the wizard truly was auto-signaling itself like that, then I doubt there's anything we can do to help that :D that's like, severe malware and shit

So newer version of N-Rage, or it's beyond the scope of anything on this forum. :D


All times are GMT. The time now is 02:39 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.