Go Back   Project64 Forums > General Discussion > Open Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 29th February 2016, 08:27 AM
Sandi1987 Sandi1987 is offline
Junior Member
 
Join Date: Feb 2016
Posts: 1
Default GoldenEye 007 Xbox 360/One Controller Settings

I can't move with Xbox One Controller.
Reply With Quote
  #2  
Old 29th February 2016, 10:11 PM
V1del V1del is offline
Project Supporter
Senior Member
 
Join Date: Feb 2012
Posts: 442
Default

Use a modern Nrage (minimum 2.3 as included in newer PJ64 releases) and tick the XInput option
Reply With Quote
  #3  
Old 3rd March 2016, 05:39 AM
NUK3 TH3 WHAL35 NUK3 TH3 WHAL35 is offline
Senior Member
 
Join Date: Jan 2015
Posts: 117
Default

Plugin? I use Jabo's 1.7x input plugin and it works fine for me. I get RUMBLE and everything with MY Xbox One controller. It's a bit tricky to configure so any Nrage plugin might be easier. It's possible to configure the Xbox One controller to Jabo, but again tricky.

I try to remind anyone configuring GoldenEye/Perfect Dark that by essentially assigning the left/right half of the controller to P1 and P2 AND configuring the in game controls to dual settings it'll play JUST like a modern FPS setup with genuine dual "analog" controls. The same applies to two player deathmatch as well. Not for 4 players though (obvious reasons).
Reply With Quote
  #4  
Old 3rd March 2016, 07:09 AM
GE Master GE Master is offline
Junior Member
 
Join Date: Mar 2016
Posts: 13
Default

Aha, just what I'm looking for! Is there a config save file that you might be willing to post? I almost need a refresher course, it's been a while for me. NUK3 it sounds like you have dialed in the controller for GE and PD. This is EXACTLY what I was seeking! Can you explain to a n00b like me what you mean by configuring in game controls to dual settings? I would appreciate any advice. Thank you.
Reply With Quote
  #5  
Old 4th March 2016, 06:28 PM
V1del V1del is offline
Project Supporter
Senior Member
 
Join Date: Feb 2012
Posts: 442
Default

If you use a Xbox One controller with DInput your triggers will count as digital buttons (not that much of an issue with N64) and rumble won't work due to Microsoft wanting to phase out DInput. We have an Xinput plugin were rumble and aforementioned triggers should work just fine, theres no reason to use jabo's.

@GE Masters
What have you done to configure your controller so far? have you gone into the configure input options and tried to set your buttons or did you just plug it in try to play something and it didn't work? (which wouldn't be surprising)
Reply With Quote
  #6  
Old 4th March 2016, 09:52 PM
NUK3 TH3 WHAL35 NUK3 TH3 WHAL35 is offline
Senior Member
 
Join Date: Jan 2015
Posts: 117
Default

When it comes to Jabo's DInput it's just a personal preference of mine. I'm also unsure if other plugins allow the following I'll describe. I've been using it since 1.6 released and just haven't strayed much away from there. When it comes to Xbox One controller the triggers have been separated and no longer cancel each other out when used together. Great for GoldenEye as LT can be used to aim and RT to fire. Not the case for 360 controllers as no update has separated them. In this case the bumpers should be fine. In regards to RUMBLE, I have modded an old driver/wrapper that allows RUMBLE to work. A link will be at the bottom.

In regards to the controls, it DEFINITELY works for Jabo's input plugin. It's hard to describe without going on and on and on and on about it. A link at the bottom is what I've configured GoldenEye/PD for. Remember, that you STILL have to go into the in game settings and configure dual controls. I can't remember exactly what they are, but it's no chore figuring it out. Just set your P1 and P2 input settings to the Xbox One controller load the respective configs.

RUMBLE for Xbox One Controllers (near ANY input plugin):
http://steamcommunity.com/discussion...7867790900215/

Config files for P1/P2 dual analog control:
http://1drv.ms/1X0oKDM

Last edited by NUK3 TH3 WHAL35; 4th March 2016 at 11:41 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:08 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.