Go Back   Project64 Forums > Public Version > Project 64 - v1.6

 
 
Thread Tools Display Modes
  #1  
Old 21st May 2009, 01:22 AM
elangoeselectric elangoeselectric is offline
Junior Member
 
Join Date: May 2009
Posts: 1
Unhappy How to install driver for Xbox 360 controller?!

I just got PJ64 for my Vista and my xbox is currently being fixed so I planned to used the USB controller with PJ64 and mess around with older games until my 360 comes back.

I plugged in my controller and found the driver online from microsoft to have the computer identify it but PJ64 still doesnt pick it up. Is there anything Im missing from installing this controller?

All Ive done is plug it in and run PJ64. Is there anything else I must be doing to get the ball rolling?

All help would be appreciated! Thanks
  #2  
Old 1st June 2009, 03:17 PM
Kain7878 Kain7878 is offline
Junior Member
 
Join Date: Jun 2009
Posts: 2
Default

Are you using a Wired or Wireless Controller? If wireless, Do you have the Receiver? or are you just using the power cord? The power Cord Does NOT Transmit the paddles input so you know, If it is Wired, Then windows should have configured it automatically if not, try looking up XBCD360 it might help you.
  #3  
Old 2nd June 2009, 01:59 AM
squall_leonhart's Avatar
squall_leonhart squall_leonhart is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Mar 2007
Location: Sydney, Australia
Posts: 2,916
Default

XBCD360 is deprecated, truth hasn't kept it up to date. use the one i've linked in my sig
__________________

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:ROG PG279Q, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
  #4  
Old 2nd June 2009, 09:44 AM
Kain7878 Kain7878 is offline
Junior Member
 
Join Date: Jun 2009
Posts: 2
Default

I was aware that the vista link wasn't working Didn't know it was the author, Thanks for the correction.
  #5  
Old 29th June 2009, 07:24 PM
Zaggs Zaggs is offline
Junior Member
 
Join Date: Jun 2009
Posts: 5
Default

http://lmgtfy.com/?q=xpadder

try this, it's light, no install, dump it if you don't want to. it ain't hard to figure out.
  #6  
Old 29th June 2009, 08:37 PM
Stewie Stewie is offline
Member
 
Join Date: Jun 2009
Posts: 37
Default

http://www.katch.ne.jp/~morii/driver/xi/index.html

Try this, right click INF and install (Xinput must be installed)

with this, you can get Rumble with pj64 and other emulators without loosing xinput support
__________________
AMD Phenom 955BE
Radeon 6850
4GB Ram

Last edited by Stewie; 29th June 2009 at 08:49 PM.
  #7  
Old 29th June 2009, 11:58 PM
squall_leonhart's Avatar
squall_leonhart squall_leonhart is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Mar 2007
Location: Sydney, Australia
Posts: 2,916
Default

still doesn't make the triggers work properly. only a proper dinput driver can do that.
__________________

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:ROG PG279Q, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
  #8  
Old 30th June 2009, 06:47 AM
Stewie Stewie is offline
Member
 
Join Date: Jun 2009
Posts: 37
Default

Quote:
Originally Posted by Squall_Leonhart View Post
still doesn't make the triggers work properly. only a proper dinput driver can do that.
If your mapping the N64 Z trigger to the 360 controller, use the Left Trigger,
the 360 Right Trigger when pressed uses minus values, but when using the Left Trigger you get plus values, Top Gear Rally 2 work perfect with the Left Trigger, when pressed lightly the speedometer inclines slowely, the harder you press it, the faster the speedometer. If you hold down left trigger and lightly press Right Trigger its will slowly decelerate, it would be easier if the right trigger had plus values though.



I am using Latest N-Rage V2
__________________
AMD Phenom 955BE
Radeon 6850
4GB Ram

Last edited by Stewie; 30th June 2009 at 07:06 AM.
  #9  
Old 30th June 2009, 07:31 AM
Stewie Stewie is offline
Member
 
Join Date: Jun 2009
Posts: 37
Default

http://dl.smayds.com/VeckSE.zip

try this, its pretty awesome, the music is mapped to the Rumble, and the game is addicted, the best freeware xbox360 controller game i have found.
__________________
AMD Phenom 955BE
Radeon 6850
4GB Ram
  #10  
Old 30th June 2009, 07:57 AM
squall_leonhart's Avatar
squall_leonhart squall_leonhart is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Mar 2007
Location: Sydney, Australia
Posts: 2,916
Default

i actually use XBCD with my Xbox S-type controller.

for any Xinput games i use xbox 360 controller emulator which works very well.
__________________

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:ROG PG279Q, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
 

Tags
360, controller, driver, pj64, xbox

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:38 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.