Go Back   Project64 Forums > General Discussion > Open Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 5th November 2010, 12:37 PM
RThorW RThorW is offline
Junior Member
 
Join Date: Nov 2010
Posts: 4
Default Problems with Joystick N64 Controller.

Hi everyone,

I'm new here, but I'll be staying for a long time ^^

Just today I received my N64 Controller-Usb adapter (the one which allows to connect 2 N64 controllers) to use my N64 original controllers, but when I use the joystick, the movement is sooo slow. The character doesn't run as always did.

I tested it with Zelda:OoT, and I know Link is very lazy, but this much? When I try using the controller pad, it works just fine. (Also, the controller pad sometimes apears as Joypad:10-14, others as Pov0 Left/R/U/D).

I don't know if it has anything to do with the range and deadzone, but i got range at 99% and deadzone at 1%.

If someone knows how to solve this joystick slow movement problem, I'll be eternally thankful.

^^

Last edited by RThorW; 5th November 2010 at 12:40 PM.
Reply With Quote
  #2  
Old 5th November 2010, 01:37 PM
Donkey Kong's Avatar
Donkey Kong Donkey Kong is offline
Alpha Tester
Project Supporter
Member
 
Join Date: Sep 2010
Location: DK Isles
Posts: 51
Default

Are You Using The Adaptoid Plugin?
__________________
The Real Question Is..

Reply With Quote
  #3  
Old 5th November 2010, 01:57 PM
RThorW RThorW is offline
Junior Member
 
Join Date: Nov 2010
Posts: 4
Default

No, and I don't know what it is either.
Reply With Quote
  #4  
Old 5th November 2010, 01:59 PM
dsx_ dsx_ is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Feb 2010
Location: Australia
Posts: 1,105
Default

adaptoid plugin is for adaptoids not mayflash adapters
Reply With Quote
  #5  
Old 6th November 2010, 05:54 PM
RThorW RThorW is offline
Junior Member
 
Join Date: Nov 2010
Posts: 4
Default

Any idea about how could I solve this slow movement joystick problem?

It works fine on the N64, but using the PC with the adapter it just doesn't.

Last edited by RThorW; 6th November 2010 at 09:18 PM.
Reply With Quote
  #6  
Old 7th November 2010, 01:03 AM
HatCat's Avatar
HatCat HatCat is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Feb 2007
Location: In my hat.
Posts: 16,239
Default

Try using N-Rage's controller plugin instead of Jabo's.
Reply With Quote
  #7  
Old 7th November 2010, 07:28 PM
RThorW RThorW is offline
Junior Member
 
Join Date: Nov 2010
Posts: 4
Default

N-Rage is not supported by P64 1.6. =/
Reply With Quote
  #8  
Old 7th November 2010, 07:53 PM
Predator82 Predator82 is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Aug 2009
Posts: 134
Default

Bullshit, it works fine
Reply With Quote
  #9  
Old 7th November 2010, 09:21 PM
HatCat's Avatar
HatCat HatCat is offline
Alpha Tester
Project Supporter
Senior Member
 
Join Date: Feb 2007
Location: In my hat.
Posts: 16,239
Default

Yep if you have issues here do state them. N-Rage's DirectInput should initialize on all emulators using this plugin spec.
Reply With Quote
  #10  
Old 1st April 2011, 09:29 PM
Goatz18 Goatz18 is offline
Junior Member
 
Join Date: Apr 2011
Posts: 7
Default

I just had this same problem and googled to this thread. My joystick was slow/not fully responsive in Project 64 but they are brand new joysticks and should work fine. All N64 controller adaptors to PC should work fine, I have the May Flash ones so I troubleshot it myself.

So the solution I got was going to the Control Panel, running XP, in the top left corner click on Classic View if not in it already, then click on the Game Controllers icon. In there for me my controllers came up as "USB Gamepad." Highlight that and click "Properties," then click "Calibrate," and follow the instructions. When finished, run Project 64 again and all shall be well. Gloriously well.

Also I kept my deadzone at 25% that Project 64 defaulted to and reduced my range to 95% just to allow some room for error. Everything plays great.

Last edited by Goatz18; 1st April 2011 at 09:32 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:37 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.